Adjust Your Phone on Your Desk in webex
Change the Viewing Angle of Your Phone (7800 Series)
Almost all phones, including Cisco IP Phone 7811, can be adjusted in order to eliminate glare on the screen by adjusting the angle of the phone.
- The phone should be disconnected from the network as soon as possible.
- Make sure that the keypad of the phone is facing the desktop when you place it there.
- The hand you use to hold the phone should be placed on one side of the footstand, while the other hand should be held on the footstand.
- Put your foot on the footstand while you hold down the phone.
- The footstand should be turned upside down.
- Make sure that the footstand is locked into place by pushing it back into the phone.
- It is important that you place your phone upright on the network and plug it in.
Change the Viewing Angle of Your Phone (8800 Series)
If you want to eliminate glare from the screen of your phone, you can adjust the angle at which the phone is held. The angle of your video camera on your phone can be adjusted to help you get a better view of the subject.
- With one hand, place the receiver into the cradle so that it can be positioned.
- It is possible to change the angle of the footstand by moving it with the other hand.
- The phone and key expansion module should be stable. To ensure this, adjust the footstand on the key expansion module, and make sure that both are stable before continuing.
- Press the Self-view button to check the angle of the camera (optional).
Adjust the Handset Rest
There may be a need to adjust the handset rest if your phone is wall-mounted or if the handset slides out of the cradle too easily. As a result you might not be able to keep the receiver in the cradle if the handset slips out.
Figure 1. Adjust the handset rest
- Pull the plastic tab from the handset rest and remove the handset from the cradle. Now you will be able to use the phone.
- Make sure that the tab is rotated 180 degrees.
- When you are holding the tab, make sure that the corner notches are facing you as you hold it.
- The tab of the cradle should be lined up with the slot of the cradle, and the tab should be pressed evenly into the slot. As a result of the rotation of the tab, there is an extension that protrudes from the top.
- Using the handset rest, return the handset back to its original position.
Secure the Phone with a Cable Lock (8800 Series)
Using a laptop cable lock with a width of up to 20 mm, you will be able to secure your phone.
- It is possible to secure your phone with the looped end of the cable lock by wrapping it around the object that you plan on securing the phone to.
- Taking the looped end of the cable and passing it through the lock is the next step.
- There is a cable lock on the door. Unlock it.
- The locking teeth need to be aligned by pressing the button and holding it for a few seconds.
- Your phone must have a lock slot on it, so you must place the cable lock inside and release the locking button on the phone.
- There needs to be a cable lock that is locked.