Inviting a SIP/H.323 room system to a meeting
Prerequisites for inviting a SIP/H.323 room system to a meeting
- A Pro account or higher is required
- At least one Room Connector port subscription (a device connected via callout counts as one port)vice ma public IP address or SIP URI must be assigned to the deviceal calls to the device must be allowed on your network firewall
- Zoom version 3.5 or higher is required to use the call-out feature.
How to invite a H.323/SIP room system to a meeting
- Sign in to the Zoom Desktop Client.
- Start or join a meeting.
- Click Participants in the meeting controls.
- Click Invite at the bottom of the participants panel.
- Click the Room System tab.
- Click the Call Out tab
- Enter the IP address or SIP URI of the H.323 or SIP device, or select a device from the H.323/SIP Rooms Directory
- Select the type of call you would wish to make – H.323 or SIP
- Press Call
- Click Show Keypad if you need to enter digits (e.g. meeting ID) during the call-out.
- Enter numbers using the pop-up keypad.
How to set the call speed for call-out to H.323 devices
1920kbps (maximum) is the default. Zoom call-out allows you to set the call speed by inserting the speed in the dial string, as shown below.
[IP address];speed=768kHow to send DTMF tones in a call-out to H.323 devices
You can enter the party number, conference number, or e.164 address in the Call-out dial string when connecting to a Gatekeeper, MCU, or other H.323/SIP hardware that requires these.
- DTMF tones have a 1 second interval
- Entering a “,” will pause 1 second in between DTMF tones
For example:
Device IP address: 162.255.36.11
Conference Number: 15562
Password: 622
Dial: 162.255.36.11;dtmf=15562#,,622#
- Dials IP address 162.255.36.11
- Send DTMF tones ‘1’ ‘5’ ‘5’ ‘6’ ‘2’ ‘#’ pause pause ‘6’ ‘2’ ‘2’ ‘#’
To add a call speed along with DTMF tones (using the example above):
Desired Call-Speed: 768 kbps
Dial: 162.255.36.11;dtmf=15562#,,622#;speed=768k